Environmental hygiene you can measure, before and after.
Nocotech Food® terminates microbial contamination that manual cleaning leaves behind or cannot reach. During a free trial we detect it, measure it, treat it, then measure again – so the result shows in real time.
Cleaning isn't the same as proving it's clean
A surface can look spotless and still carry a bacterial load or an established biofilm. The gaps stay invisible until they surface in a swab, an audit, or a recall.
Contamination you can't see
Bacteria settles and biofilms establish in drains, joints, conveyors, and the difficult-to-reach areas of intricate equipment. Nothing on the surface tells you they’re there.
Some bacteria can survive routine sanitising and extreme temperatures
Established biofilms can resist conventional sanitisers, then re-seed clean surfaces once cleaning stops.
Reach that manual cleaning misses
Equipment internals, ceiling voids, and HVAC runs never get consistent contact from foaming or wiping.
Proof you can hand to an auditor
Manual cleaning leaves little hard evidence it worked — which is exactly what audits and recall investigations ask for.
Detect, test, treat, test, validate
Five stages, run on your site. Each one gives you something to see or a number to keep, so the result is yours to check rather than ours to claim.
Find the contamination with BIOXITE
We scan your surfaces with BIOXITE, our own bacteria and biofilm detector. Under its light, organic contamination that’s invisible to the naked eye shows up – so you can see where the risk sits before anything is treated.
Set a baseline with a NEOGEN ATP swab
We swab the same surface with a NEOGEN Clean-Trace ATP test and read it on the luminometer. That gives a starting RLU number — a measured baseline of the load on the surface, before treatment.
Apply Nocotech FOOD
Nocotech FOOD is deployed as a dry hydrogen peroxide vapour that reaches all surfaces and equipment internals, within the cubic treatment area, without adding moisture. This is the part we sell. Everything either side of it exists to show it working.
Measure again after treatment
Following the EN 17272 protocol, we swab the same surface a second time and read a new RLU number on the luminometer.
Compare the before and after
We put the two RLU numbers side by side. The drop from the before reading to the after reading validates the treatment on your surfaces, evaluated by your team in real time.
Nocotech is already validated and conforms to the EN 17272 (under specific protocol) On trial we go the extra distance and let you observe the result first-hand.
The outcome is a recipe of dosage and diffusion time which is controlled, repeatable and validated.
Scientifically proven effectiveness
Laboratory and field tests have demonstrated the effectiveness of the diffusion device, combined with the range of disinfectant products. The results show the complete elimination of bacteria, viruses, spores, and fungi on the treated surfaces. The treatment is certified according to the EN 17272 standard.
Nocotech FOOD
The hero of the trial. Automated dry diffusion that treats what manual sanitation can’t reach, then breaks down to oxygen and water.
Scientifically proven effectiveness
Laboratory and field tests have demonstrated the effectiveness of the diffusion device combined with the range of disinfectant products. The results show the complete elimination of bacteria, viruses, spores, and fungi on the treated surfaces. The treatment is certified according to the EN 17272 standard.
Bio-disinfect
All disinfectant products in the range are liquids containing a scientifically formulated, stabilised hydrogen peroxide (H₂O₂) solution. They are peracetic acid-free, biodegradable (leaving no residue), non-corrosive on all surfaces (including electronic surfaces), non-allergenic, and environmentally friendly. The dry vapour technology is effective against viruses, bacteria, yeasts, fungi, and spores.
Automated bio-disinfection
Nocotech is an automated dry diffusion surface bio-disinfection solution. The solution relies on the combined action of a treatment device and a disinfectant. The automated system also allows for insecticidal or deodorizing treatments. All accessible surfaces, even the most difficult to reach (including equipment), are treated.
Built for food facilities
Complete surface coverage
Vapour reaches enclosed machinery, conveyors, and infrastructure that manual sanitation misses.
No residue on food contact surfaces
Hydrogen peroxide breaks down into oxygen and water. No chemical residue remains, and no post-treatment wipe-down is required.
No surface corrosion
A non-corrosive formulation protects stainless steel equipment, production lines, sensitive electrical equipment, and infrastructure.
Documented compliance
Verifiable environmental hygiene records to support audits, certifications, and regulatory oversight.
Food facility applications
Processing facilities
Meat, dairy, seafood, and produce operations where control of Listeria, Salmonella, and other pathogens is critical to product safety and market access.
Commercial kitchens
Restaurants, catering, and food service requiring enhanced hygiene between shifts or after a contamination event.
Cold storage and distribution
Temperature-controlled storage and logistics where mould and microbial contamination cut into shelf life and quality.
Beverage production
Breweries, wineries, and beverage plants where environmental contamination affects consistency, flavour, and stability.
Support for your certification
Oxylogix protocols support HACCP environmental monitoring requirements and help facilities maintain SQF, BRC, and FSSC 22000 certification. The approach provides verifiable environmental hygiene that complements your existing sanitation program, particularly in difficult-to-clean areas and outbreak response.
This is not a replacement for good manufacturing practices or routine sanitation. It is a controlled, validated layer of protection where traditional methods have limitations.
Contact us to discuss your free trial
We work with quality managers, food safety teams, and operations managers to run a trial on your site and evaluate technical fit, compliance, and implementation.